You can pair and connect two devices to a Minirig at the same
time. To switch between them you need to stop the music on the
device playing then start playing music on the second device.
connect audio cable
connect two devices to share music high and low gain settings
We recommend that you use LOW gain at normal listening lev-
els for the best sound quality
If your device does not have Bluetooth or you would like to use a wired connection instead, you can connect to the Minirig using the
supplied AUX cable. ensure your minirig is off and remove any audio cables before using cable mode.
plug in a subwoofer when using bluetooth
The Minirig has two gain (volume) settings – LOW and HIGH. In
Bluetooth mode it will always start in LOW gain. In AUX mode
it will start in LOW or HIGH gain depending on which AUX socket
you plug in to.
To change gain at any time:
•
Check that the Minirig is ON and audio is playing
•
Press the button once, do not hold it down
•
In high gain the LED will be brighter than in low gain
high gain
low gain
In Bluetooth mode, the Minirig will output audio from both AUX
sockets. This allows you to connect to another Minirig, Minirig
subwoofer or Hi-Fi system.
•
Plug one end of the AUX cable into the headphone socket on
your audio device.
•
Plug the other end into one of the AUX sockets on the Minirig.
The Minirig will turn on when you insert the cable displaying the
green led There will be no tone. when you unplug the cable
the minirig will turn off displaying the red led there will
be no tone.
home