MiniMax MM 16, Руководство пользователя

Страница: 3 / 34

2
Inspection and Uncrating
Your Mini Max Bandsaw is heavily built but it is not immune to shipping
damage. Please inspect your saw thoroughly
before signing for the machine! Inspect the
crate, pallet and the actual machine for any
dings, dents or crate damage. If you see
anything, do not sign the delivery receipt and call
Mini Max immediately at this toll free number
(866-975-9663)!
If you have access to a camera, photo
evidence is extremely helpful. Pull out the
packing list and check to see that all of your
accessories are there. Confirm that if there are
accessories missing,this fact shows as a back
order notation on the packing list.
Now that you have your bandsaw
delivered safely to your shop, you can begin the
uncrating process. You can use a hammer with
a pry bar or even a reciprocating saw to remove
the crate from the saw. Cut the plastic off the
machine and remove it. Inside the plastic you
will find a black plastic tool kit. The tool kit
includes a push stick, allen wrenches, open end
wrenches, a factory manual and 4 leveling bolts.
See Figure 3, Tool Kit . Use the
appropriate metric wrench in your tool kit to remove the two lag bolts that
secured your saw to the frame. Once you have removed the bolts slide the
bandsaw off the pallet. or lift the saw, with the two hoist holes on the top of the
saw.Please be careful and observe all normal precautions and safety procedures
while working on, moving, and operating this machine.
MOBILITY KIT
If you purchased the mobility kit you will only
use two of the leveling bolts found in the toolkit.
Mount the wheels to the left side of the base of
the saw using the two bolts supplied. See
Figure 4 Below, Mobility Wheels Mounted . An
easy way to do this is tilt the saw up and slide a
piece of wood under the frame. This will give
you the clearance you will need to mount the wheel
bracket. The Johnson bar then gets placed