M
INI
M
AG
-OP-EN
- 9 -
OPERATION CONTROLS - TRACTION
1.
SPRAY JET [BLUE] (OPTIONAL):
Activates Water Pump for remote Spray Wand
2.
“ON-BOARD” SOAP SYSTEM [GRAY] (OPTIONAL):
Dispenses soap directly to
the deck level
3.
ECON TOGGLE SWITCH [GREEN] (OPTIONAL):
Reduces power to give
machine a longer run time
4.
KEY SWITCH:
Turns power of the machine
ON
and
OFF
5.
LOAD TOGGLE SWITCH [ORANGE] (OPTIONAL):
Engages different Scrubdeck
parameters for increased RPM for Stripping and Polishing
6.
REVERSE SWITCH:
Pull back for machine drive reverse
7.
SQUEEGEE LIFT LEVER:
Raises and lowers the Squeegee
8.
MENU CONTROL:
Scrolls through different options on the LCD display - there are
3 different screens it will scroll through
9.
LCD SCREEN:
Lists functions and settings of the machine
10.
SOLUTION FLOW CONTROL TOGGLE [BLUE]:
Push down (-) to reduce and
push up (+) to increase the solution fl ow
11.
DOWN PRESSURE TOGGLE SWITCH [BLACK]:
Controls the pressure to the
Scrubdeck - push up (+) for higher down pressure, down (-) for lower pressure
12.
SCRUBDECK SWITCH:
Raises and lowers the Scrubdeck
13.
SPEED CONTROL KNOB:
Controls the speed of the Traction Drive - Turn counter-
clockwise to reduce speed
14.
EMERGENCY SHUT OFF SWITCH:
Shuts
OFF
the machine in case of
emergency
15. HOUR
METER:
Hour meter to indicate complete time machine has been
ON
16.
RECHARGE CYCLE METER:
Shows the amount of charges on a machine
17.
MANAGER SOLUTION LOCKOUT (OPTIONAL):
Allows ability to set
Solution Flow and then remove key to not allow changing of parameters
18.
MANAGER DOWN PRESSURE LOCKOUT (OPTIONAL):
Allows ability to set Down Pressure and
then remove key to not allow changing of parameters
19.
CHARGER PORT:
Red 50 used to receive charger input for Optional external charger
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
