miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
8
Interference of external objects and/or liquids with the appliance
Never push objects of any kind into this product through openings as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the amplifier.
Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury, and serious damage to the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Connecting
When you connect the Amplifier Unit to other equipment, turn off the power and unplug all of the equipment
from the supply source. Failure to do so may cause an electric shock and serious personal injury. Read the user's
manual of the other equipment carefully and follow the instructions when making the connections.
Sound Volume
Reduce the volume to minimum before you turn on the amplifier to prevent sudden high levels of noise which
may cause hearing or speaker damage.
Output connectors
WARNING: Output connectors marked with the lightning flashes indicate high voltages that are
potentially life threatening. Wiring to these terminals requires installation by an instructed person and
the use of ready-made leads or cords. Custom wiring should only be carried out by qualified personnel.
To prevent electric shock, do not operate the product with any of the conductor portion of the speaker wire
exposed.
NOTE: For reasons of safety and performance, use only high-quality fully insulated speaker cables of stranded
copper wire. Use the largest wire size that is economically and physically practical, and make sure the cables are
no longer than necessary.
Precautions when connecting to MAINS IN
When mounting or connecting the product always disconnect it from mains. Only connect the product to an
appropriate AC circuit and outlet, according to the requirements indicated on the rating plate.
If a power cut occurs while the amplifier is switched on, it will restart automatically once the power supply has
been restored. All settings prior to the loss of power will be maintained.
IMPORTANT: Always connect the Product to mains through the MAINS IN connector on the Amplifier Unit.
IMPORTANT: Always use ready-made mains cables with original connectors when connecting the product to
mains.
IMPORTANT: When disconnecting the Product from the mains, always disconnect at the mains end first, before
disconnecting the connector at the Product end.
DO NOT REMOVE MAINS CONNECTOR GROUND, IT IS ILLEGAL AND DANGEROUS.
