miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
11
2
I
NSTALLATION AND
S
ETUP
2.1
S
OFTWARE INSTALLATION AND LICENSE ACTIVATION
Please read this section carefully prior to installing the software.
2.1.1
Framework installation
Prior to installing the software, download and install the following frameworks. You will need to accept the
license agreements in order to successfully complete the installation. If you haven’t updated these recently,
check that you have the latest versions prior to running the miniDSP install programs.
Microsoft .NET framework
(version 3.5 or later)
Latest version of
Adobe Flash
Latest version of
Adobe Air
Microsoft Visual C++ 2010 Redistributable Package: for
x86
(32-bit operating system) or
x64
(64-bit operating
system).
2.1.2
Software installation
When you receive notification that your order has shipped, your installation software downloads will be
available at the
User Downloads
section of the miniDSP website, under the
NanoAVR
heading.
http://www.minidsp.com/userdownloads
There are two programs to download and install:
nanoAVR DL Utility
The
nanoAVR DL Utility
is used to configure remote control codes, as well as perform various
other maintenance operations on the nanoAVR DL, including the serial number necessary for
software license activation. You will find it under the heading “nanoAVR DL programmer” in the
nanoAVR
section of the User Downloads on minidsp.com.
After downloading, unzip the file and run the
nanoAVR_DL.exe
installer.
Dirac Live Calibration Tool (DLCT) for miniDSP
The
Dirac Live Calibration Tool
is used to perform measurements, generate correction filters,
and load them into the nanoAVR DL. You will find it under the heading “nanoAVR Dirac Live
Tools” in the
nanoAVR
section of the User Downloads on minidsp.com.
After downloading, unzip the file and run the
Dirac Live Calibration Tool v1.0.5 Setup.exe
installer (the version number may change).
