miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
10
1.3
N
ANO
AVR
DL
/
D
IRAC
L
IVE
®
CONFIGURATION STEPS
The steps for configuring the
NanoAVR DL
HDMI audio processor with Dirac Live® to optimize your home theater
system is summarized as follows:
1.
Connect the
NanoAVR DL
audio processor into your system and
install software. See
Section 2, Installation and Setup
.
2.
Run a series of acoustic measurements using the
Dirac Live
Calibration Tool For miniDSP
program, to capture the acoustic
behavior of your speakers and room. See
Section 3, Acoustic
Measurement
.
3.
Generate the digital room correction filters that will be executed
by the
NanoAVR DL
processor. Up to four filter sets can be
downloaded into the processor for easy real-time recall and
auditioning. See
Section 4, Filter Design
.
4.
Once the digital room correction filters are designed and
downloaded, the computer can be disconnected, as computer
connectivity is not required for normal listening. See
Section 5,
Using the NanoAVR DL HDMI audio processor
.
