miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
40
In
Manual Mode
:
1.
Cut and paste the coefficients from the text output of the design program.
2.
Press the
Process
button.
3.
Confirm that the frequency response graph is as you expect.
4.
Press
Send to DSP
. This will write the coefficients into the DSP's memory.
5.
To clear the filter coefficients, click
Clear Taps
and then
Send to DSP
.
If, after selecting a filter file or setting coefficients, the frequency
response graph does not change as expected, make sure that the
Bypass button is turned off.
If you clear the filter taps, make sure that you also bypass the
filter, otherwise there will be no audio through that channel.
7.4
I
NVERT AND MUTE
Each channel can be inverted in polarity, and individually muted. When either of these options is selected, the
visual indicator on the button is "lit":
7.5
T
IME DELAY
A delay of up to 1500 or 3000 ms (depending on the plugin) can be applied to each output channel. To set the
delay, click in the delay entry box for a channel. The delay value can be entered numerically, and the up and
down arrows can be used to change the delay in small (0.02 ms) increments.
The time delay corresponds to a distance. This distance is shown in centimeters below the entry box.
