miniDSP MINISHARC, Руководство пользователя

Страница: 10 / 47

miniDSP Ltd, Hong Kong / www.minidsp.com / Features and specifications subject to change without prior notice
10
2.2 DC P
OWER
The miniSHARC accepts a regulated DC power supply on the 2-pin connector. A short cable from a 2.1 mm panel
mount DC power socket is included with the kit purchase.
Standalone use
When the miniSHARC is not used with any of the miniDSP accessories that take power from the
miniSHARC board, the miniSHARC can be powered with a DC supply in the range of 5 to 24 V.
Use with powered accessories
When the miniSHARC is used with any of the miniDSP accessories that take power from the
miniSHARC board (VOL-FP, DIGI-FP, DA-FP, AN-FP, and miniDAC8), the miniSHARC must be
powered from a regulated 5V supply only . Any other supply voltage will cause malfunction and
possible damage to boards that will not be covered under warranty.
The connection to the DC power header is as shown below. Note that a slightly different wiring scheme is used
when the AN-FP is used in conjunction with the miniSHARC – see page 16.