miniDSP Ltd, Hong Kong /
/ Features and specifications subject to change without prior notice
37
5.
Set the sample rate to 96000 and set format to 32-bit IEEE-754:
6.
Click the
generate
button. The result will be shown in red.
7.
In the HA-DSP-CF plugin, open the FIR block, click on Browse and locate the file that you saved from
rephase. After loading it you will be able to confirm the amplitude response of the filter:
(If you still see a flat line, check that the filter is not bypassed
–
if the button at lower right says
“Bypassed,” click on it.)
If you had previously set up parametric EQ filters in the PEQ block for headphone EQ, disable them now. You can
use the PEQ block to add additional EQ if desired.
