Minicom iCentral, Инструкция по установке и эксплуатации

Страница: 14 / 24

iCENTRAL MINICOM INSTALLATION MANUAL 12
LOCK (LK) OUTPUT
The “LK” terminal at the door station provides an output voltage (to activate an
automatic gate or electric door strike) whenever the “HOUSE” and “DOOR” buttons
are pressed simultaneously at any room station.
WIRING LOCK (LK) & CHIME (CH) OUTPUTS
The Lock output (LK) and Chime voltage output (CH) will provide 12 Volt DC @ 50mA
which can be used to power up relays which in turn will switch voltage to the device
being used.
WARNING Using these outputs to drive a resistive load of less than 240 ohm may
result in damage to the output transistors. Check coil resistance of relays
to be used with a multimeter.
LK-
+
CH-
N.C.
COM
N.O.
N.C.
COM
N.O.
RELAY 12 V DC
*
*
RELAY COIL RESISTANCE SHOULD NOT BE LESS THAN 240 OHM
RELAY 12 V DC
*
DOOR STATION