Communication Error
5-4
Restore
After making changes to ID numbers using the Auto, Default or Manual numbering, and AFTER clicking
Apply
, you can revert to the position as it was before the changes.
To do so:
From the
Options
menu, select
Restore
.
Note!
Restore
is only available BEFORE the new scan is activated.
Communication Error
If a Communication Error box appears when trying to scan the system – see Figure 5-5. Check the following:
•
The RS232 Serial cable is connected to the computer’s and Phantom Manager’s serial ports.
•
The Com Port settings in
Options
/
Com Port
are set correctly.
•
The Firmware Upgrade label (F10) appears on the screen. See Figure 5-5.
Figure 5-5 Communication Error
Fail icons
When after a carrying out a numbering procedure, Fail icons appear – see Figure 5-6. Wait 30 seconds and
repeat the numbering procedure.
Figure 5-6 Fail icons
