The OSD functions
2-7
( For the rest of the column downwards to take on the same change press
End
,
End
.)
4. Press
Esc
.
When Timeout activates, the keyboard and mouse are disabled, and a ‘Timeout’ label appears. See Figure 2-6.
Figure 2-6 The TIMEOUT label
To re-enter the system:
Press
Esc
.
Scanning Computers – F4
You scan computers from the Select Computer
window.
To start scanning:
Press
F4
. During scanning a Confirmation label appears, showing which
Remote
computer is presently
displayed. See Figure 2-7.
Figure 2-7 The Scan Confirmation label
Note!
The scan will skip any active computer set to 000 in the
SCN
column.
To stop scanning press
F4
.
Image tuning - F5
You can tune the image of any remote computer screen from the Select Computer
window.
To adjust the screen image:
1. Navigate to the remote computer you wish to adjust.
2. Press
F5
. The screen image of the selected computer appears, together with the Image Tuning IN label.
See Figure 2-8.
Figure 2-8 The Image Tuning IN label
3. Adjust the image by pressing the
Right
or
Left
Arrow keys.
4. When the image is satisfactory, press
F5
again, the Image Tuning OUT label appears. See Figure 2-9
Figure 2-9 The Image Tuning OUT label
5. Adjust the image by pressing the
Right
or
Left
Arrow keys. When the image is satisfactory, press
Esc
.
