Exiting the OSD
2-8
Note!
Picture quality is relative to distance. The further away a remote computer is from the Manager position,
the lower the image quality, and the more tuning needed. So place the higher resolution computers closer to the
manager unit.
Skipping out unconnected or switched off computers- F6
When navigating through the list of computers, you can skip out the unconnected or switched off computers.
You do this with Autoskip. By default, Autoskip is activated.
To activate or deactivate Autoskip:
In the Setup window (F3), press
F6
. The F6 Autoskip in the hotkey section of the OSD changes from ON to
OFF
When Autoskip is inactive and the computer being scanned is switched off, then the
Manager
screen appears
dark.
Changing the keyboard language - F8
You can change the keyboard language from US English (QWERTY)
US
to German (QWERTZ)
DE
or
French (AZERTI)
FR
.
To change the Language:
1. In the Setup window (F3), press
F8
until you reach the desired language.
2. Press
Esc
.
Changing the OSD display hotkey – F9
The default hotkey to display the OSD, is
Shift
,
Shift
. You can replace this hotkey with any of the following:
•
Ctrl, Ctrl
•
Ctrl,
F11
•
Screen
With a choice of 4 different hotkeys, you can operate up to 4 OSDs from 1 KVM position. Each OSD needs a
different display hotkey. This is useful for cascading systems of for example, the Supervisor MU, Supervisor
Pro, and Phantom.
To change the hotkey:
1. In the Setup window (F3), press
F9
. The hotkey changes from
Shift,
Shift
to
Ctrl,
Ctrl
.
Continue pressing
until you reach the required hotkey.
2. Press
Esc
. The new hotkey is set. From now on, use the new hotkey to display the OSD.
Exiting the OSD
When the OSD is displayed press
Esc
to exit the OSD and remain switched to the current computer.
