Page 24
The Minelab Musketeer Advantage
Trouble-shooting Guide
Fault
Solution
No Sound
Ensure the unit is turned “On”
Check battery orientation and battery connections
Ensure battery pack is correctly fitted
Check headphones and their connection
Erratic Noises
Check battery charge and battery connections
Ensure coil plug is tightened firmly
Reduce the sensitivity by turning counter-clockwise
Switch out of “Fix” ground balance position
Check and adjust the ground balance
Check headphones and their connection and lead
Check for sand or grit between coil cover and coil
No Target Response
Ensure unit is turned “On”
Check battery charge and battery connections
Check coil connection
Check headphones and their connection
In the unfortunate circumstance that you need to return your detector to
Minelab for service, please fill out the Minelab Service Repair Form on
page 27 and enclose it with the detector. Please supply as much detail as
possible about the fault as this will assist our service engineers to rectify the
problem quickly and efficiently.
Instruction Manual
Page 25
Specifications
These specifications are subject to change without notice.
Length
Extended
53" (1350 mm)
Unextended
47" (1190 mm)
Weight
Control Box (excl. Batteries)
530 g
TS800 Slimline Coil
500 g
TS1000 Slimline Coil
650 g
Batteries
Alkaline Cells
Eight 1.5V “AA”*
NiMH Battery Pack
12V, 1000 mAhr
Coil Options
TS800 Slimline “Double D” waterproof
TS1000 Slimline “Double D” waterproof
Headphones
Impedance
8 - 32 ohms
Jack – Stereo / Mono
¼"
Frequency
Transmission, sinewave
5 kHz
Ground Rejection Fixed
Manual Ground Adjust
Pot 1 turn
Search Modes
Discriminate, All Metals / Ground Adjust Enable,
All Metals / Pinpoint
Controls
On / Off, Sensitivity
Pot and switch
Ground Adjust
Pot and switch
Discriminate Level Adjust
Pot 1 turn
All Metals / Discriminate
Switch 2 Pos.
Pinpoint
Switch 3 Pos.
Warranty
Control Box
2 years
Coil
1 year
Patents
AUS 595835, others pending.
* Not included
