Page 4
The Minelab Musketeer Advantage
List of Parts
The box in which your
Musketeer Advantage
is shipped should contain the
following items. When you first receive your
Musketeer Advantage
, please
check that all of these items are in the box:
Part Description
Part Number
Advantage
Control Box
TS800 Slimline Coil
2021-0045
Or TS1000 Slimline Coil
2021-0046
Two-Piece Shaft Assembly
8012-0022
Black Armrest
8011-0002
Armrest Cover
8001-0013
Alkaline Battery Pack
0311-0021
Nylon Bolt 1.5” x 1/4” (1 off)
4001-0001
Nylon Bolt 2” x 1/4” (2 off)
4001-0003
Nylon Wing Nut 1/4” (3 off)
4002-0003
Teardrop Washer (4 off)
4005-0006
Velcro Tape - Felt
8507-0001
Velcro Tape - Hook
8507-0002
Warranty Card
5303-0001
This Instruction Manual
4901-0038
Since there may be a range of options available in this detector type,
equipment may vary according to the model or country of issue. Certain
descriptions and illustrations may differ (in this manual) from the exact
model that you have purchased. In addition, Minelab reserve the right
to respond to ongoing technical progress by introducing changes in
design, equipment and technical features at any time.
Instruction Manual
Page 5
Accessories
To further enhance your
Advantage
and give you greater capacity and
versatility, the following items are available for you to purchase:
Part Description
Part Number
•
TS800 Slimline Coil
2021-0045
•
TS1000 Slimline Coil
2021-0046
•
Rechargeable NiMH Battery Pack
0311-0019
•
Mains NiMH Charger
Region Specific*
•
12V NiMH Vehicle Battery Charger
0302-0038
•
Control Box Hip Mount Bag
3001-0034
•
RPG Headphones
4523-0018
•
Blue Minelab Cap
5306-0013
•
Blue Minelab Polo Shirt, Blue Minelab Jacket
Size Specific*
Assembling Your Musketeer Advantage
Please follow these simple instructions to assemble your new
Musketeer
Advantage
. Refer to the drawings to identify parts and how they are
positioned. If you have any difficulties, please contact your dealer for further
instructions.
Armrest / Upper Shaft Assembly
a) Remove the black nylon bolt and wing nut
(1) from the armrest (2).
b) With the cup of the armrest positioned up
(so that your arm rests in the cup and your
hand comfortably grips the foam handgrip),
slide the armrest (2) onto the end of the
black upper shaft (3).
c) Push the nylon bolt (1) through the holes
and tighten the wing nut by hand.
Figure 1 - Armrest
Assembly
* Ask dealer for correct part number
