Minelab Manticore, Инструкция по эксплуатации

Страница: 53 / 78

CONTENTS
53
Discrimination Pattern
(Continued)
ACCEPT / REJECT AN ID
UPON DETECTION
Before you can Accept / Reject an ID upon detection:
ƒ
You must be in the Detect Screen, and;
ƒ
Accept / Reject must be assigned to a Soft Key�
You can assign Accept / Reject as a Soft Key Action
— see
page 35 � Accept / Reject is assigned by
default to the Right Soft Key�
Reject a Target Upon Detection
When an Accepted Target ID is detected, immediately press
the Soft Key
( Reject)
� The Target ID on the ID Map will
turn grey� That Target ID will no longer give a
target response�
If the same Target ID is detected, and the Soft Key
( Reject) is pressed again, the Target ID will remain
Rejected� This means you can keep swinging over the
target while repeatedly pressing the Soft Key
( Reject)
to ensure the target is completely rejected� This is useful
for targets that have a spread‑out Target Trace/slightly
varying Target ID�
Accept a Target Upon Detection
Enable All Metal mode� When a Rejected Target ID is
detected, immediately press the Soft Key
( Accept) � The
Target ID on the ID Map will turn white� That Target ID will
now give a target response�
If the same Target ID is detected, and the Soft Key
( Accept)
is pressed again, the Target ID will remain
Accepted� This means you can keep swinging over the
target while repeatedly pressing the Soft Key to ensure the
target is completely Accepted� This is useful for targets
that have a spread‑out Target Trace/slightly varying
Target ID�
ALL METAL
All Metal mode disables the Discrimination Pattern so that
all metal objects (ferrous and conductive) will be detected�
All Metal is global, and is Off by default�
NOTE: When All Metal is enabled, ferrous targets display a
Target ID with ferrous indication, and give ferrous detection
tones (rather than remaining silent)� How they will sound is
defined by the Ferrous Tones and Audio Theme settings�
You can assign All Metal as a Soft Key Action —
see
page 35 � All Metal is assigned by default to
the Left Soft Key�
Enable All Metal
All Metal can be enabled in two ways — via an assigned
Soft Key from the Detect Screen, or via the Settings Menu:
1. Navigate to Discrimination Pattern:
Settings > Discrimination Pattern
2. Press  /  to select All Metal �
When All Metal is enabled, the Discrimination Pattern
is turned Off and is not shown on the ID Map, and the
Ferrous Limits change to a lighter shade of grey�
3. Press ( Back) to return to the Detect Screen�
88
20
88
20
All Metal On — The Discrimination
Pattern is turned Off� All Metal Off — The Discrimination
Pattern is turned On�