Minelab Manticore, Инструкция по эксплуатации

Страница: 52 / 78

CONTENTS
52
Discrimination Pattern
The Discrimination Pattern setting lets
you decide which Target IDs to detect or
ignore, so you can dig more treasure and
less trash�
Individual Target IDs can be Accepted or Rejected to create
a Discrimination Pattern� Upon detection, Rejected IDs
remain silent while Accepted IDs give a target response�
Discrimination Patterns are local — each Search Mode has
its own editable Custom Discrimination Pattern�
Discrimination
Pattern
Custom
Discrimination Pattern in
the Settings Menu�
THE DISCRIMINATION PATTERN EDITOR
The Discrimination Pattern Editor lets you Accept or Reject
Target IDs� The Target Trace remains live in the Editor so you
can see detected targets in real‑time� You can refer to it as
you adjust the Pattern to include/exclude specific targets�
The Ferrous Limits boundary is displayed for reference�
Target ID 0–99
64
Ferrous Limits
boundaries
Target Trace
Accepted IDs
(white areas)
Selection Width
Rejected IDs
(grey areas)
Currently
selected ID
Mor
e
Ferr
ous
Less
Ferr
ous
Mor
e
Ferr
ous
EDIT A DISCRIMINATION PATTERN
1. Navigate to the Custom Pattern Editor:
Settings > Discrimination Pattern
2. Press

/

to select Custom , then press the Right
Soft Key ( Edit) to open the Custom Pattern Editor�
The Action Bar options will change to show the editing
functions,
( Accept) or ( Reject) �
3. To reject a group of IDs , press

/

to select the
start ID� Press  /  to choose the Selection Width (1, 3,
5, 10, or 20) — this is the number of Target IDs selected
at the same time�
Press the Right Soft Key ( Reject) � The group of
Rejected IDs will change to grey�
To accept a group of IDs , press  /  to select Rejected
IDs� Press the Right Soft Key ( Accept) � The group of
accepted IDs will now be white�
If your selection includes a combination of Accepted
and Rejected IDs, the Right Soft Key will default to
( Reject) � Press the Soft Key twice to Accept the
selection�
4. Continue Accepting or Rejecting Target IDs using the
Right Soft Key
( Accept/ Reject) until you have
created your final Discrimination Pattern�