F3 COMPACT Service Manual
_______________________________________________________________________________________________________________________
17
c.
The body of the detector is now opened revealing the internal components which can
now be replaced as required.
3.2
Closing the Detector Body
a.
The following procedure outlines the steps involved in closing and resealing the detector
body:
•
Ensure all parts are present, in good working order and lay the detector body on its left
side.
•
Thread the coil cable through the detector hinge and position the upper shaft into the
detector body.
•
Carefully turn the detector body over so that it is on its right side. Check the coil
connector nut is tight.
•
Attach the coil connector to the socket and tighten the coil connector as tight as possible
with fingers.
Figure 16: Open Detector Body
Figure 17: Threading Coil Cable and Attaching Shafts
