Minebea CSA-528, Инструкция по эксплуатации

Страница: 6 / 34

IV IV
2. Power supply
Warning
Warning
Caution
3. Application note
Caution
Caution
Caution
Caution
Install each cable while turned off the power supply. Might it get an electric shock, and this instrument be damaged when working with the
power supply enters.
Confirm the power supply voltage of the instrument and the specifications are corresponding to the supplied power supply before turning on the
power supply. Consult with us when not matching. There is danger of causing damage and the electric shock of this instrument when using it
like the uncertainty.
Groundline should be connected ground securely. When groundline is not connected, it may cause a malfunction of the instrument or electric
shock to the operator
Before this instrument is newly used, or when the strain gage applied transuducer is exchanged with a new one, please execute the calibration.
If not calibrating, it may cause not obtaining the correct measurement result, or a malfunction in the instrument and there is a possibility of the
damage of peripherals. Moreover, there is a similar possibility that the result is incorrect even if the calibration has been already made. Please
take the calibration again.
It causes not obtaining a correct measurement result, and the malfunction when the setting change is carelessly executed while measuring it
with this instrument and there is a possibility of the damage of peripherals. 。
Please confirm connecting wires is correctly executed when you use this instrument. If it is not connected correctly, it may cause the
malfunctions on the instrument, and the damage to the peripheral equipments or even worse serious accidents.
Please do not give the impact such as throwing the thing at this instrument.
There is a possibility of causing the malfunction on this instrument, or causing the damage of the electric circuit.