Minebea Intec Puro EF-4PDDP Series, Руководство по эксплуатации

Страница: 37 / 63

— OFF disabled*
— ON enabled
— TOTAL Total Value
— OFF disabled*
— RESULT Accumulated result is printed
— ALL Accumulated data is printed
— LI.SET List Set
— FORMAT Format send to printer and to PC
— MULTI Multi-line (single column) printout*
— SINGLE Single line printout
— FEED Paper Feed Setting
— LINE Move a paper up one line after printing
— 4LF Move a paper up four lines after printing*
— FORM Form feed after printing
— RESET Factory setting
— NO not restored*
— YES enabled
— END Leave menu level
— BAUD Baud Rate
— 2400 2400
— 4800 4800
— 9600 9600*
— 19200 19200
— 38400 38400
— 57600 57600
— 115200 115200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 date bits, no parity*
— STOP Stop Bit
— 1 1*
— 2 2
— RESET Factory setting
— NO not restored*
— YES enabled
— END Leave menu level
— MODE PC Output Mode
— OFF disabled*
— MAN.OUT Manual output
6.2.6 Menu Selection [PRN.COM]
Enter this menu to setup Print Communication parameters.
Default settings are identified by an "*"
PRN.COM
6.2.7 Menu Selection [PC.OUT]
Enter this menu to define PC Output parameters.
Default settings are identified by an "*"
PC.OUT
6 Menu Settings Bench scale Puro®
Minebea Intec EN-35