Minebea Intec Puro EF-4PDDP Series, Руководство по эксплуатации

Страница: 20 / 63

Note:
Activation of this mode must be done prior via menu. See Chapter 6.2.1 .
Release the button. The application is activated.
1. To select application Check Weighing Mode, press and hold the
Mode
F
button until
[CHECK] is displayed with application icons and at bottom of the screen.
[CLR.LIM] is displayed and all limit LEDs are on.
2. Press the
Unit
(No) button to use the stored limits. Go on at step 11.
3. Press the
Off
(Yes) button to set new limits.
[SET.LOW] (set low limit) is displayed and the yellow LED for the low limit is on.
4. Press the
Off
(Yes) button to view the Low limit value.
The Display will show stored low limit with all digits blinking [000.000] (in this
example, 0.000 kg).
5. Press the
Unit
(No) button to edit the value.
The first digit is blinking [_00.000].
6. Press the
Off
(Yes) button to accept and highlight the next digit (or press the
Menu
M
+
(exit) button to go back one digit).
Bench scale Puro® 5 Operation
EN-18 Minebea Intec