Minebea Intec Puro EF-4P, Руководство по эксплуатации

Страница: 42 / 66

— MAN.OUT Manual output
— MAN.STA Manual output, if data are stable
— INT.OUT Interval output
— AUT.OUT Automatic output
— AUT.STA Automatic output, if data are stable
— INTERV Specify output interval (if INT.OUT is selected)
— 1 CYC Every display cycle
— 2 CYC After 2 display cycles
— 5 CYC After 5 display cycles*
— 10 CYC After 10 display cycles
— 20 CYC After 20 display cycles
— 50 CYC After 50 display cycles
— 100 CYC After 100 display cycles
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— BAUD Baud rate
— 4800 4,800
— 9600 9,600*
— 19200 19,200
— 38400 38,400
— 57600 57,600
— 115200 115,200
— PARITY Parity
— 7 EVEN 7 data bits, even parity
— 7 Odd 7 data bits, odd parity
— 7 NONE 7 data bits, no parity
— 8 NONE 8 data bits, no parity*
— 7 MARK 7 data bits, mark parity
— 7 SPACE 7 data bits, space parity
— STOP Stop bit
— 1 1*
— 2 2
— HAND.SH Handshake
— NONE No handshake*
— XON.XOF No function
— RESET Factory settings
— NO not reset*
— YES activated
— END Exit menu level
— CAL
5.3.2.8 [PC.COM] menu selection
The parameters for the PC communication can be specified in this menu.
Factory settings are marked with "*"
PC.COM
5.3.2.9 [CAL.ADJ] menu selection
The scale can be calibrated and adjusted in this menu (see Chapter 5.4 ).
CAL.ADJ
5 Operating Floor scale Puro®
Minebea Intec EN-39