9. Place the container on the load plate (in this example: 0.527 kg).
10. To tare the container, press the
T
(Tare) key until [0 kg] and [NET] are displayed.
11. Place the sample in the container.
Sample < lower limit value
Yellow LED illuminates.
Sample is within the tolerance limits
Green LED illuminates.
Sample > upper limit value
Red LED illuminates.
In order to display the currently defined limit values (in this example the value for
the lower limit is 1 kg and the value for the upper limit is 1.100 kg), the
Mode
F
key
can be pressed briefly at any time during the check weighing.
The scale displays the value for the lower limit when the yellow LED briefly
illuminates and the value for the upper limit when the red LED briefly illuminates.
The indicator LEDs indicate whether the weight of the sample is below, within, or
above the tolerance limits.
5 Operating
Floor scale Puro®
Minebea Intec
EN-23
