Example: Use a known number of parts (reference quantity) to determine an unknown
number of parts.
If counting needs to be carried out into a container, tare the container.
Release the key. The application is activated.
1.
To select the Counting application, press the
Mode
F
key until [COUNT] (Counting) is
displayed at the lower edge of the screen with the application icon
.
2.
[PUT 20] (apply 20 parts) is displayed.
1)
3.
Select the desired reference quantity (10, 20, 50, 100, 200) by briefly pressing the
Mode
F
(decrease in increments) key or the
Unit
(increase in increments) key.
4. Press the
Off
(Yes) key to save the selected reference quantity.
If the load plate is empty, [PUT.PW] (apply reference weight) is displayed in the
display.
5.
Place the number of parts (reference quantity, in this example 20) on the load plate.
6. Press the
Off
(Yes) key to save the average sample weight.
[PW.OK] (reference weight confirmed) is briefly displayed in the display.
2)
7.
Counting is initialized. The currently applied quantity is displayed in the display: e.g.
[20 pcs].
Bench scale Puro®
5 Operating
EN-18
Minebea Intec