manualshive.com logo in svg

Minebea Intec Puro EF-4P 150, Руководство по эксплуатации, Страница: 11 / 64

Поделиться
Скачать
Minebea Intec Puro EF-4P 150 Скачать руководство пользователя страница 11

3.1.5

Leveling the weighing platform

To achieve reproducible weighing results at all times, the weighing platform must be set
up to be precisely horizontal.

Therefore the weighing platform must be re-leveled every time it is moved to a different
location.

Leveling the weighing platform

3.1.6

Acclimatizing the device

If a cold device is brought into a warm environment, condensation may form.

3.2

Connection

3.2.1

Electrical supply

The scale is supplied using a power supply unit, unless a battery supply is required.

Connect the USB-C male plug connector with the USB-C female plug connector on the
underside of the device, then connect the power supply unit to the wall socket.

Note:

Do not use the USB-C connector cable for the PC communication. Instead, use a
standard USB-C cable.

.

Use the adjustable feet to align the weighing platform so that the air bubble of the
level indicator is in the center of the circle.

.

Check that all four of the adjustable feet are touching the surface.

The weight of the platform must be spread equally across the adjustable feet.

.

Adjust the adjustable feet: Retract the adjustable feet (clockwise) in order to lift the
scale. Extend the adjustable feet (counter-clockwise) in order to lower the scale.

.

Keep the device disconnected from the mains and allow it to acclimatize at room
temperature for approx. two hours.

Bench scale Puro®

3 Device installation

EN-8

Minebea Intec

Содержание Puro EF-4P 150

































































Отзывы:

Нет отзывов