MP 26/10
Installation and Calibration Manual
Minebea Intec
EN-16
3.5.5.
Print Data Set
Printer related options are available in the File Menu. The available options are shown in the
figure on page 15.
Printer setup:
Configure the initial settings for the printer in the printer setup menu.
Print Preview:
If needed, go to print preview and view project information, configuration/parameters,
operating level and connection diagram by selecting the options and clicking
OK
. This displays
a preview and the details for the selected project. The print option is also available in this
menu under the option view.
Print:
To print all the data set (project information, configuration/parameters, operating level and
connection diagram) select the print menu and the corresponding printer.
3.5.6.
Select Language
Two languages, English and German, are available for the MP26/10 tool. The Language can be
selected under Extras
Language.
Selecting a language different from the previous selection generates a popup message as
shown below.
On confirming the software restart, the selected language will become effective.
