Minebea Intec Maxxis 5 Phase PR 5900/81, Руководство по эксплуатации

Страница: 60 / 94

WP-A WP-A Max 3000g d= 0.1g
0 0
N N
gg
2480g 2500g 2520g
Scale-A
Production line
Recipe
Setpoint
Difference
Coarse Fill net B1 WPA
PL 1
Single 1
2500.0 g
2500.0 g
Stop Recipe
If a phase is active on the weighing point, the weighing point is displayed with the status
of the selected material (in this case: "Coarse" status). Lines 2…6 are displayed as
conigured under [Coniguration] - [View weighing point] ; see Chapter 5.4.10 .
WP-A WP-A Max 3000g d= 0.1g
1 0
N N
– –
gg
2480g 2500g 2520g
Scale-A
Production line
Recipe
Setpoint
Difference
Held Fill net B1 WPA
PL 1
Single 1
2500.0 g
2500.1 g
Continue Cancel Recipe
Selecting [Stop] will halt the active phase.
The symbol for the batching mode lashes. The irst line is marked in red.
Selecting [Continue] will resume the batching process.
Selecting [Cancel] will terminate the phase that was stopped. The subsequent line of the
recipe is executed.
Selecting [Recipe] will take you to the menu items set in the coniguration.
Select
/ to exit the view. Exiting has no impact on the ongoing process.
If intervention by an operator is also necessary on another weighing point, the status
switches between "Hold" and "Alarm WP
‑
B".
7.3.6 Acknowledging the Tolerance Alarm
If the value entered for the tolerance in P is exceeded with the component, a
tolerance alarm is triggered.
Phase PR 5900/81 7 Operation and visualization of the scales
EN-58 Minebea Intec