Minebea Intec IS16EDE-H, Инструкция по установке и эксплуатации

Страница: 14 / 40

14 Installation and Operating Instructions IS16/34/64EDE
General Specifications
14
General Specifications
(applicable for use in standard applications, not in legal metrology)
Model IS 16 EDE-H IS 34 EDE-H IS 64 EDE-S IS64EDE-H
Maximum capacity kg 16 34 64 64
Readability g 0.1 0.1 1 0.1
Linearity g
≤
±0.2
≤
±0.2
≤
±0.5
≤
±0.3
Repeatability g
≤
±0.05
≤
±0.1
≤
±0.3
≤
±0.1
(standard deviation)
Response time (average)
s <1.5 <1.5 <1 <1.5
Fastest response time (IQ) s <1 <1 <0.8 <0.8
Adaptation to ambient
conditions and application
requirements by selection of one of 4 optimized filter levels
Data output speed 0.1, 0.1, 0.2, 0.4 (normal data output speed)
(depends on filter level selected)
Dust and water protection rating
IP65 IP65 IP65 IP44
Net weight, approx. kg 15 15 15 15
Requirements for power
connection (optional) ING2 (TNG 220/115V)
Frequency Hz 48 - 63 48 - 63 48 - 63 48 - 63
Power consumption:
with isi 10,20,30 VA max. 34 max. 34 max. 34 max. 34
connected to ING2) average 10 average 10 average 10 average 10
Power consumption:
weighing platform only, VA average 2.5 average 2.5 average 2.5 average 2.5
connected to ING2
Selectable weight units
g, kg, ct, oz, ozt, tlh, tlt, GN, dwt, mg, /lb, tlc, mom, K, tol, bat, MS
Allowable ambient °C +0 to +40 +0 to +40 +0 to +40 +0 to +40
temperature range (273 K - 313 K) (273 K - 313 K) (273 K - 313 K) (273 K - 313 K)
Allowable operating °C +10 to +30 +10 to +30 +10 to +30 +10 to +30
temperature range (283 K - 313 K) (283 K - 313 K) (273 K - 313 K) (273 K - 313 K)
Automatic zero tracking,
can be turned off by
menu code °C Standard feature Standard feature Standard featureStandard feature
Built-in interface, RS-485 (standard, xBPI protocol): 8 bits; odd parity; transmission speed: 9600–38,400 baud; half-duplex.
Convertible to RS-232 (SBI protocol): 7 bit; parity: even, mark, odd, space; transmission speed:
150–19,200 baud; 1 or 2 stop bits; software/hardware handshake.
Factory setting: 1200 baud; odd parity; 1 stop bit; hardware handshake with 2 characters after CTS