
Stable loads within the accept limits are tared
(in all check modes)
— BEEP.SI
Beeper Signal (in Checkweighing Mode)
— OFF
disabled* (default setting)
— ACCEPT
Beep when weight is within accept area
— UNDER
Beep when weight is under the low limit
— OVER
Beep when weight is over the high limit
— UNDOVR
Beep when weight is outside the accept area
— TOT.SET
Totalization Setting
— OFF
disabled* (default setting)
— AUTO
Automatic Totalization
— MAN
Manual Totalization
6.5
Totalization Mode
The application symbol is
. It is shown only on Display-Weight.
If counting isn’t initialized then only weights are accumulated. If counting is already
initialized then pieces and weights are accumulated.
Only Net values can be accumulated!
6.5.1
Menu Selection
This application is selectable in menu:
OP.FUNC
6.5.2
Running Modes
-
Manual Mode (see chapter
)
-
Automatic Mode (see chapter
)
-
Printouts (see chapter
But the pan must be unloaded (weight < 2d) too.
The following parameters are displayed for three seconds:
Weight
totalized weight with unit
Piece Weight
number of elements in the sum memory
.
The statistical information can be shown on the display by briefly pressing the
Button.
6 Application Programs
Compact Scale Puro® Count
Minebea Intec
EN-29