Mine Site Technologies NS40 I.S. Скачать руководство пользователя страница 53

Страница: 53 / 98

Recommended Settings

Description

Field

When the

DHCP

setting is selected, all static

configuration fields are removed from the page.

Static or DCHP can be assigned to the
device.

IP Address
Assignment

The default IP address for CPU 1 is

192.168.1.90

and CPU 2 is

The IP address of the CPU in the device.

IP Address

192.168.1.91

. Assigning a different IP

address is required for each management CPU.

By default the subnet mask is

255.255.255.0

Identifies the subnet the IP address
belongs to for the CPU in the device.

Subnet
Mask

Settings are dependent on the site's network
design.

The IP address of the default gateway to
be used by the device.

Gateway

Settings are dependent on the local domain name
registration.

The DNS servers used by the managment
CPU when looking up host names.

DNS
servers

The MTU in the device is automatically
configured based on the protocol configuration.
It can be manually configured if required.

Maximum transmission size (MTU) is
the largest packet size (in bytes) a
network can transmit.

MTU

4.6.2 Configuring Wireless Interface Settings

Each WAC on the NS40 can have up to four SSIDs enabled and configured via the

Wireless Interface

page.

NS40 I.S. Wireless Network Switch

Revision C

Configuration using the Web Interface

Содержание NS40 I.S.



































































































Результаты поиска

Содержание NS40 I.S.

Отзывы:

Mine Site Technologies NS40 I.S., Руководство пользователя, Страница: 53 / 98

Результаты поиска

Содержание NS40 I.S.

Отзывы: