Mine Site Technologies NS40 I.S., Руководство пользователя, Страница: 46 / 98

4.5.4 Configuring Network Time
The
Network Time
configuration page defines regional time settings on the NS40.
The network time can be synchronised with a Network Time Protocol (NTP) server. The NTP lookup is
performed by the switch's management CPU (which resides on the Infrastructure VLAN).
A description of the configuration parameters are shown in the table below.
Description Field Section
Displays the current system time.
Current System Time General
The frequency that an NS40 will synchronise with the NTP server.
600
seconds is the default setting.
Update Interval
The number of times the NS40 will try to connect to the NTP server
if it cannot make a connection. Number of retrys
The IP address or hostname of the NTP server Hostname Time Server
The port of the NTP server (default
123
) Port
To add an NTP server:
1. Enter the IP address or hostname of the NTP server in the Hostname field.
2. Enter the port number in the Port field.
3. Click Save to save settings or Save & Apply to save and instantly apply new settings to the device.
4.5.5 Configuring Location Based Services
The
Location Based Services
page establishes where AeroScout tag reports are sent. An NS40 can
communicate with an AeroScout Positioning Engine and/or an MST Tracker Engine.
Revision C 46 NS40 I.S. Wireless Network Switch
Configuration using the Web Interface