Mine Site Technologies impact, Руководство пользователя, Страница: 73 / 130

To enable a NTP server:
1. Select Enable NTP Server check box.
2. Enter the NTP server name (the IP address or a host name), or select a NTP server from the drop-down
box.
3. Click Save Settings.
Note: If the network device loses power, network time will not be maintained. If NTP is enabled,
the network switch will synchronise the time shortly after power up.
Note: If a host name is entered, DNS settings must be configured and the device must be able to
contact the DNS server.
Manual Time Configuration
Time on a device can be set manually if there is no access to a Network Time Protocol (NTP) server.
To set the time manually:
1. Select the time and date from the drop-down boxes.
2. Alternatively, click Copy Your Computer's Time Settings button to copy the time from the connected
computer.
3. Click Save Settings.
5.5.5 Rebooting or Restoring the Network Device
The System configuration screen enables the device to be rebooted or restored to the factory default
settings as shown in
Figure 36: System configuration screen .
Wireless Network Switch User Manual 73 Revision A
Configuration Using the Web Interface