manualshive.com logo in svg

Mine Site Technologies impact, Руководство пользователя, Страница: 109 / 130

Поделиться
Скачать
Mine Site Technologies impact Скачать руководство пользователя страница 109

Appendix

E

Discovering Devices on the Network

The Ubicom Device Manager is a PC software application used to detect devices and configure their IP
addresses. It is used when firmware upgrades have reset the default IP settings. The tool should be run
on a PC connected on the same network segment as the target device.

Note:  The management CPU in an ImPact network device responds to the Device Manager tool.
A PC running the tool must be on the Infrastructure VLAN (if VLANs are enabled).

To use the Device Manager to discover / configure IP settings:

1. Locate and open the folder on your PC where the Device Manager tool is located.
2. Double-click the Ubidevman icon to launch.

3. The Ubicom Device Manager window is displayed and an automatic scan is initiated. Click the Scan

icon at any time to re-scan the network for devices.

4. Note the MAC address to identify network device to edit, and click on the row to highlight it.
5. Click on the Configure icon. The IP Address Properties dialog box is displayed.

Wireless Network Switch User Manual

109

Revision A

Содержание impact



































































































































Отзывы:

Нет отзывов