Mine Site Technologies impact, Руководство пользователя, Страница: 56 / 130

3. Enter Group Key Update Interval in the supplied field. By default it is 3600 seconds. This is the
amount of time before the group key (used for broadcast and multicast data encryption) is changed.
4. Enter the Pre-Shared Key in the supplied field (applicable to WPA Personal security mode). The key
must be at least 8 alphanumeric characters in length.
5. Click Save Settings.
5.3.4 Configuring Wireless Extensible Authentication Protocol (EAP)
The Wireless EAP configuration screen is used to configure wireless authentication by a RADIUS server
(as used by WPA Enterprise). The configuration screen is shown in
Figure 24: Wireless EAP configuration .
Figure 24: Wireless EAP configuration
To configure wireless EAP, click on the drop-down boxes in the supplied fields. Click Save Settings to
save settings. A description of the fields and settings are described in the table below.
Settings Description Field
Setting is at 120 minutes by
default. Amount of time in minutes before
a client device is required to
re-authenticate. Authentication Timeout
This is specific to each site. IP address of the authentication
server. RADIUS server IP Address
By default the port number is
1812. Port number used by the access
point to connect to the
authentication server. RADIUS server Port
Password that matches with the
authentication server. Password used by the access point
to access the RADIUS server. RADIUS server Shared Secret
Revision A 56 Wireless Network Switch User Manual
Configuration Using the Web Interface