manualshive.com logo in svg

Mine Site Technologies impact, Руководство пользователя, Страница: 11 / 130

Поделиться
Скачать
Mine Site Technologies impact Скачать руководство пользователя страница 11

About This Manual

This manual describes features and functions of the WNS (Wireless Network Switch) hardware. It provides
information about system design, hardware installation, configuration and how to troubleshoot any issues.
You will find it easier to use the manual if you are familiar with networking systems and have an
understanding of electronics in a network environment.

Conventions used in the manual

This publication uses the following conventions to highlight and convey information:

•

Text that requires input from an operator is boldfaced.

•

Operator interface screen control names are boldfaced.

•

Keyboard input keys are CAPITALISED.

Icons

Icons are used in the manual to highlight specific information as shown the table below.

Description

Icon

The Note icon indicates important information or references to the
user.

Note:

The Important icon contains information to prevent damage to the
product and injury to the user.

Important:

The Caution icon indicates to stop and pay attention or an action not
to be performed.

Caution:

Additional Support

For additional support please visit our website 

www.minesite.com.au

.

Wireless Network Switch User Manual

11

Revision A

Содержание impact



































































































































Отзывы:

Нет отзывов