Mindray PM-50, Руководство по эксплуатации

Страница: 24 / 60

Measurement
18
4.3 Measuring Steps
The measurement is usually done using the adult finger SpO
2
sensor.
Palm or foot sensors may be adopted for infants. Before measurement,
check the SpO
2
sensor and its cable for damages. Do not use the
sensors if any damage is found.
4.3.1 Adult Measurement
Please follow the steps below to use the adult finger SpO
2
sensor:
1. Insert the sensor’s connector to the dual-purpose socket.
2. Turn on the Pulse Oximeter to enter the standby mode.
3. Attach the sensor to an appropriate site on the patient.
Figure 4-1 How to place the adult SpO
2
sensor
4. The readings will be displayed on the LCD screen a moment
later.
Note
During measurement, make sure that the light window is over the
fingernail, and the cable should be on the backside of the hand.
To acquire accurate results, please read data until the sensor is
steadily placed.
Readings may not be accurate when either the sensor or the
patient is moving.