Getting Started
Installing the Batteries
TM80/TM70 Telemetry Monitor Operator’s Manual
3 - 5
3.4
Installing the Batteries
You can use three AA batteries or a lithium-ion rechargeable battery pack to run the
TM80/TM70.
The runtime is dependent on the battery solution your chose. A lithium-ion battery pack
will provide the longest runtime. For details about the recommended AA batteries, refer
to
"Miscellaneous" on page 18 - 6
WARNING
•
Insert the ECG lead set into the ECG connector. The following perfor-
mance may be affected by a weak connection:
◆
ECG signal quality
◆
Wireless signal strength
◆
Water resistance
•
Do not use the ECG leadwire to move or lift the TM80/TM70. This may
cause the device to fall, which may damage the equipment or injure the
patient.
NOTE
•
Insert the SpO
2
cap in the SpO
2
connector when SpO
2
is not in use.
NOTE
•
Always keep the battery compartment dry.
•
Never use brute force to install the lithium-ion battery pack or AA bat-
tery frame. Otherwise the waterproof ring surrounding the battery
frame edge may be broken to affect the waterproof performance.
