Mindray BeneHeart D1, Руководство оператора

Страница: 67 / 106

12-3
12.3.1 Power-On Test
Each time you turn the equipment on, the welcome screen is displayed, and the equipment starts power-on test
immediately. If a failure is detected, related failure information is displayed.
12.3.2 Real-Time Test
Real-time test persists throughout the runtime of the equipment. If any failure is detected, corresponding alarm is
reported.
12.3.3 Battery Insert Test
A battery insert test is performed automatically if a battery is installed over 5 minutes after the equipment is powered off.
You can follow the screen instructions to check the following:
1. Press the corresponding soft keys and Shock button as indicated on the screen.
2. Select an option to respond to the equipment if you have heard the voice prompt.
Other items are tested hereafter automatically. If all items pass the test, the test result is “Test Passed”. If any failure is
detected, corresponding prompts and failure codes are displayed.
12.3.4 Auto Test
If battery is installed, the equipment performs auto test at the configured time even being powered off to check the
equipment’s operational performance and alert operators if a problem exists.
Auto test can be initiated between 0:00 am to 5:00 am. To set auto test time, on maintenance screen, select
[ Config. ]
→
[ Config. Edit ]
→
enter the required password
→
[ Test Setup ]
→
[ User Test Setup ]. The default setting is 3:00
am.
The equipment displays no information on the screen during auto test. We recommend you to perform the user test if
auto test failed.
At the completion of auto test, a report is saved automatically.
CAUTION

With power off, auto test is performed only when battery is installed.