Mindeo ES4200, Руководство пользователя

Страница: 12 / 108

6
2 Installation guide
2-1 Important notes of installation
ESD
The scanner needs to protected from ESD events that may occur in an ESD-controlled environment.
Magnetism
Mounting screws must be non-magnetic material. Do not place any magnetic material within 1 inch/ 2.54
cm of the chassis without testing.
2-2 Mounting
There are four mounting holes (M2) on the top of the chassis and it is shown in Figure 2-1.
Top view Bottom view
Side view of top Side view of Bottom
Side view
Figure 2-1 Mounting diagram
Notes:Mounting screws and locating pins must be non-magnetic material. Do not place any magnetic
material within 1 inch of the chassis without testing.