Minarik C1MMXL05-D240AC, Руководство пользователя

Страница: 20 / 44

12
Installation
Connections
Warning
Do not connect this equipment with power applied. Failure
to heed this directive may result in fire or serious injury.
Motor connections
Minarik drives supply motor voltage from A1 and A2 terminals.
It is assumed throughout this manual that, when A1 is positive
with respect to A2 , the motor will rotate clockwise (CW) while
looking at the output shaft protruding from the front of the motor.
If this is opposite of the desired rotation, simply reverse the
wiring of A1 and A2 with each other.
Connect a DC motor to PCB terminals A1 and A2 as shown in
Figure 4. Ensure that the motor voltage rating is consistent
with the drive’s output voltage.
Power connections
Connect the AC line power leads to terminals L1 and L2.
250-0277.qxd 6/9/00 1:00 PM Page 12