MIMAKI JV5-320S, Руководство по эксплуатации

Страница: 65 / 312

2-29
About Function Menus
Setting values in function menus
The menus contain the following functions.
SET UP functions
Function name Sub function Setting value Function
MEDIA COMP.
(p. 3-50)
-255 to 255 Corrects the feed rate of media.
MediaFeed
SETUP
(p. 6-4)
FEED METHOD DIRECT, NORMAL Switches between methods for
detecting the feed rate of media.
SPEED SWITCHING 200% to 10% Sets the media feed rate.
MOVEMENT TEST Performs testing whether or not the
media is compatible with the direct
detection method using the media
encoder.
HEATER
(p. 3-38)
(p. 6-30)
SET TEMP. Pre-heater OFF, 20 to 60 ° C
(OFF, 68 to 140
°
F)
Sets heater conditions.
Print heater OFF, 20 to 60
°
C
(OFF, 68 to 140 ° F)
Post-heater OFF, 20 to 70
°
C
(OFF, 68 to 158
°
F)
SET TIME STANDBY (NONE, 0- 90 min / In steps of 10
minutes)
OFF TIME (NONE, 0 - 90 min / In steps of 10
minutes)
PRINT MODE
(p. 6-5)
FINE quality STD., FINE, FAST Sets a print quality level and printing
direction.
DRAFT quality STD., FINE, FAST
SCAN DIRECTION Uni-D
Bi-D
LOGICAL SEEK ON, OFF
INK LAYERS
(p. 6-7)
1 to 9 Sets the number of layers in which
ink is to be applied.
DRYING TIME
(p. 6-7)
SCAN 0.0 to 19.9 sec. Sets the time to wait for ink drying.
Draw.END 0 to 999 sec.
AUTO CUT
(p. 6-8)
ON, OFF Cuts the media automatically after
printing.
PRE-FEED (p. 6-8) ON, OFF Feeds the media back and forth
before printing.
MARGIN (p. 6-8) -20 to 75 mm Sets a non-printing area along the
right and left edges of the media.
COLOR PATTERN
(p. 6-9)
ON (Sublimination transfer ink:
ONx1 to ONx5), OFF Prints a color pattern for nozzle
missing check near the right edge of
the media.
It also prints on the left edge when
using sublimation transfer ink.
REFRESH (p. 6-10) LEVEL 0 to 3 Refreshes the print heads during
printing.