MIMAKI JV400-SUJV-160, Руководство для печати

Страница: 3 / 12

- 3 -
Prepare this product
Following the procedures below, prepare this product.
1.
Connect the PC installed RasterLink to
the printer.
• For details, refer to “Connecting Cables” in Chap-
ter 1 of this product Operation Manual .
2.
Turn on the printer.
• For details, refer to “Turning the Power ON” in Chapter
2 of this product Operation Manual .
3.
Before setting a media, check the height of
print head.
• For details, refer to “Adjusting the Head Height” in
Chapter 2 of this product Operation Manual .
4.
Set the media.
• For details, refer to “Setting a Media” in Chapter 2 of this product Operation Manual .
5.
Perform a test printing.
• Check if discharging defect such as nozzle clogging exists or not.
• For details, refer to
“Test Printing” in Chapter 2 of this product Operation Manual .
6.
Perform a media correction.
• Correct the feeding rate of media.
• For details, refer to
“Setting Feed Correction” in Chapter 2 of this product Operation Manual .
7.
Perform a dot position correction.
• Correct the ink drop position.
• For details, refer to
“Correct the ink drop position for bidirectional printing” in Chapter 2 of
this product Operation Manual .
USB cable
Power switch
Height-adjusting handle