MIMAKI DM2-1810 Скачать руководство пользователя страница 3

Страница: 3 / 146

DISCLAIMER OF WARRANTY

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE SOLE AND EXCLUSIVE

WARRANTY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-

PLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS, AND MIMAKI NEITHER ASSUMES NOR AU-

THORIZES DEALER TO ASSUME FOR IT ANY OTHER OBLIGATION OR LIABIL-

ITY OR MAKE ANY OTHER WARRANTY OR MAKE ANY OTHER WARRANTY IN

CONNECTION WITH ANY PRODUCT WITHOUT MIMAKIÅfS PRIOR WRITTEN

CONSENT. IN NO EVENT SHALL MIMAKI BE LIABLE FOR SPECIAL, INCIDEN-

TAL OR CONSEQUENTIAL DAMAGES OR FOR LOSS OF PROFITS OF DEALER

OR CUSTOMERS OF ANY PRODUCT.

Requests

•

This Manual has been carefully prepared for your easy understanding, how-

ever, please do not hesitate to contact a distributor in your district if you have

any inquiry.

•

Description contained in this Manual are subject to change without notice for

improvement.

•

Generally, names and designations referred to in this Manual are trade marks

or registered trade marks of the manufacturers or suppliers.

Reproduction of this manual is strictly prohibited.

Содержание DM2-1810



















































































































































Результаты поиска

Содержание DM2-1810

Отзывы:

Бренды по названию

Популярные бренды

MIMAKI DM2-1810, Руководство по эксплуатации

Результаты поиска

Содержание DM2-1810

Отзывы:

Бренды по названию

Популярные бренды