MIMAKI DM2-1810 Скачать руководство пользователя

Страница: 56 / 146

- 3.4 -

Cleaning the wiper and ink caps

The ink cap prevents clogging of the head nozzle caused by dried nozzle.

The wiper wipes out ink adhered to the head nozzle.

As the machine is used to plot images, the wipers and ink caps gradually become stained with ink

and dust. Use the cotton swabs to clean the ink and wiper.

Clean the wiper and the ink cap periodically so as to keep the machine in good operation condition.

• Clean the wiper at the end of the day’s operation.

• Remove dust from the wiper before starting head cleaning. A dusty

wiper may damage the head and cause defective plotting.

• Clean the two wipers at a time.

• Do not move the carriage out of the capping station by hand.

• The Front side of each wiper is made of felt, and the rear side is made

of rubber. Do not rub the felt side with a swab. Instead, press the swab

against the felt side surface to remove dirt. Rubbing the felt side sur-

face will make it fluffy and result in clogged nozzle. Wipe ink off the

rubber side surface with a swab.

• Once the replacement of the wiper and the cleaning of the caps have

been completed, immediately press the [ENTER] key to allow the car-

riage to return to the capping station. If the carriage is left in the afore-

mentioned state for an extended period of time, the nozzles can be

clogged.

Cleaning Tools :

• Cleaning liquid bottle kit A29 (SPC-0137 : Option)

• Cotton swabs

STEPS:

Press the [FUNCTION] key.

Capping station side

FUNCTION
SETUP

< ENT >

Rubber surface

Felt surface

Содержание DM2-1810



















































































































































Результаты поиска

Содержание DM2-1810

Отзывы:

Похожие инструкции для DM2-1810

Бренды по названию

Популярные бренды

MIMAKI DM2-1810, Руководство по эксплуатации

Результаты поиска

Содержание DM2-1810

Отзывы:

Похожие инструкции для DM2-1810

Бренды по названию

Популярные бренды