MIMAKI DM2-1810, Руководство по эксплуатации

Страница: 51 / 146

- 2.21 -
To replenish ink, set a new ink cartridge in the ink station
If ink in the cartridge comes to an empty, the corresponding message appears.
Plotting can be continued but ink may run out during plotting.
Immediately put a new ink cartridge.
< When the amount of ink becomes small during plotting >
Indicate the ink color which has run out.
The display at right indicates that [slot1] and [slotA] comes to an end.
< When the amount of ink completely runs out during plotting >
Indicate the ink color which has completely run out.
The display at right indicates that [slotC] runs out.
STEPS:
1. Either of the messages shown above is dis-
played on the LCD during plotting.
When [INKnearEND] appears, the LOCAL mode is resumed
and the operation stopped each time printing of a single data
is completed. Proceed with Step 2 at the end of the plotting
operation. Proceed to Step 2 at the end of the plotting
operation.
When [INKEND] appears, plotting cannot be continued.
2. Install a new ink cartridge.
Pull out the ink cartridge of the indicated number and then
set a new ink cartridge.
3. The machine enters the LOCAL mode.
Continuous plotting is possible.
Ink Near End
1 - - - - - - - A - - - - - - -
Ink End
- - - - - - - - - - C - - - - -