MIMAKI CF2 Series, Руководство по эксплуатации

Страница: 78 / 186

— 2.30 —
Tangential Crease Swivel
cutter roller blade
R5 speed The speed that is employed when cutting an arc that is O O
5 mm or less in radius. If [OFF] is selected, the arc is
cut at the previously specified speed.
R10 speed The speed that is employed when cutting an arc that is O O
less than 5 mm or more and 10 mm or less in radius.
If [OFF] is selected, the arc is cut at the previously
specified speed.
R15 speeds The speed that is employed when cutting an arc that is O O
10 mm or more and less that 15 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
R20 speed The speed that is employed when cutting an arc that is O
15 mm or more and less that 20 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
R30 speed The speed that is employed when cutting an arc that is O
25 mm or more and less that 30 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
R40 speed The speed that is employed when cutting an arc that is O
30 mm or more and less that 40 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
R50 speed The speed that is employed when cutting an arc that is O
40 mm or more and less that 50 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
R100 speed The speed that is employed when cutting an arc that is O
50 mm or more and less that 100 mm. If [OFF] is
selected, the arc is cut at the previously specified
speed.
VIBRATION
Vibration speed can be set to 5 levels. Normally, set O
the vibration speed to 4 or 5. Works that are easily
affected by heat should be cut using a lower vibration
speed. When using cutter holder 2N, set the vibration
to “OFF.”
Setting item Description Pen