Milwaukee MW806 MAX Скачать руководство пользователя страница 50

Страница: 50 / 52

MW806

Portable Meter

MANMW806 10/21

CERTIFICATION

Milwaukee Instruments conform to the

CE European Directives

Disposal of Electrical and Electronic Equipment.

The product

should not be treated as household waste. Instead, hand it over

to the appropriate collection point for the recycling of electrical

and electronic equipment, which will conserve natural resources.

Disposal of waste batteries.

This product contains batteries,

do not dispose of them with other household waste. Hand them

over to the appropriate collection point for recycling. Ensuring

proper product and battery disposal prevents potential negative

consequences for the environment and human health. For

more information, contact your city, your local household waste

disposal service, or the place of purchase.

RECOMMENDATIONS FOR USERS

Before using this product, make sure it is entirely suitable for your

specific application and for the environment in which it is used.

Any variation introduced by the user to the supplied equipment

may degrade the instrument’s performance. For your and the

instrument’s safety do not use or store it in hazardous environments.

WARRANTY

This instrument is warranted against defects in materials and

manufacturing for a period of 2 years from the date of purchase.

Electrodes and Probes are warranted for 6 months. This warranty

is limited to repair or free of charge replacement if the instrument

cannot be repaired. Damage due to accidents, misuse, tampering

or lack of prescribed maintenance is not covered by warranty. If

service is required, contact your local Milwaukee Instruments

Technical Service. If the repair is not covered by the warranty,

you will be notified of the charges incurred. When shipping any

product, make sure it is properly packaged for complete protection.

Содержание MW806 MAX





















































Результаты поиска

Содержание MW806 MAX

Отзывы:

Похожие инструкции для MW806 MAX

Бренды по названию

Популярные бренды

Milwaukee MW806 MAX, Инструкция по эксплуатации

Результаты поиска

Содержание MW806 MAX

Отзывы:

Похожие инструкции для MW806 MAX

Бренды по названию

Популярные бренды