![background image](http://html1.mh-extra.com/html/milwaukee/mw806-max/mw806-max_instruction-manual_1798956040.webp)
40
MW806
Portable Meter
Interval Logging
1. From the Setup mode, set Log Type to INTERVAL (default) and
desired time interval.
2. From the measurement screen press LOG/CLEAR.
"PLEASE WAIT" is displayed followed by number of saved logs
and lot logging number.
ºC
ATC
10.01
4.01
1.68
CAL
pH
LOG
25.1
W A I T
7.11
P L E A S E
LOG#
ºC
ATC
10.01
4.01
1.68
CAL
pH
LOG
25.1
OT 003
7.11
0 1 4 L
3. Press RANGE/
during logging to view the available ("FREE")
space left. Press RANGE/
again to return to active logging
screen.
4. Press LOG/CLEAR (or ESC) to end current interval logging
session. "LOG STOPPED" is displayed and the meter returns to
measurement mode.
ºC
ATC
10.01
4.01
1.68
CAL
pH
LOG
25.1
9 9 7
7.11
F R E E
LOG#
ºC
ATC
10.01
4.01
1.68
CAL
pH
LOG
25.1
T O P P E D
7.11
L O G S
Interval Logging Warnings
“OVER RANGE”
Sensor failure and logging stops.
Measurement exceeds the specifications limit
of the probe or meter.
“MAX LOTS”
Maximum number of lots (100) was reached.
Cannot create new lots.
“LOG FULL”
Log space is full (1000 logs limit was reached).
Logging stops.
“NO PROBE”
Probe is disconnected or damaged.
Logging stops.