manualshive.com logo in svg

Milwaukee MW105 MAX, Инструкция по эксплуатации, Страница: 39 / 48

Поделиться
Скачать
Milwaukee MW105 MAX Скачать руководство пользователя страница 39

LOGGING (MW106) 

39

When connected to a PC, to enable logging:

 

y

Press LOG/CLEAR. LCD displays “LOG ON METER” with ACCEPT 

tag blinking.

 

y

Press GLP/ACCEPT. Meter disconnects from the PC and the PC 

icon is no longer displayed.

 

y

To return to “EXPORT TO PC” mode, follow steps 2 and 3 above. 

Exported data file details:

 

y

The CSV file (comma separated values) may be opened with a 

text editor or spreadsheet application. 

 

y

The CSV file encoding is Western Europe (ISO–8859–1).

 

y

Field separator may be set as comma or semicolon. 

See Separator Type (

MW106

) in SETUP OPTIONS section.

 

y

Interval log files are named PHLOT###, where ### is the lot 

number (e.g. PHLOT051). 

 

y

Manual log file is named PHLOTMAN and stability log file is 

named PHLOTSTA.

USB Export All

1.  With the meter on, insert a USB flash drive into the micro USB 

port located on top of the meter. If the flash drive does not 

have a micro USB connector, use an adapter.

2.  Press RCL then RANGE/

 to select the “EXPORT  ALL” option.

3.  Press GLP/ACCEPT to confirm. 

LCD displays “EXPORTING” and the percentage counter, 

followed by “DONE” when export is completed. Display returns 

to the lot selection screen.

Note: The USB flash drive can be safely removed if the USB icon 

is not displayed. Do not remove the USB drive during export.

 

Содержание MW105 MAX

















































Отзывы:

Нет отзывов