3
ASSEMBLY
WARNING
Recharge only with
charging instructions, read the operator’s manual
supplied with your charger and battery.
Inserting/Removing Battery Pack
Insert
the battery pack by sliding battery pack into the
battery bay. Insert the battery pack until the battery
latches lock.
To
remove
the battery pack, press in both battery
latches and slide the battery pack out of the battery bay.
WARNING
To reduce the risk of
injury, do not look directly into the light when the
light is on.
To reduce the risk of injury, always fully extend and
lock legs into position before raising the poles.
Light may tip and cause injury.
To reduce the risk of injury, keep hands clear of
the housing area when collapsing the extension
poles. Head may descend rapidly, pinching hands
SPECIFICATIONS
Cat. No. .....................................................M12 SAL
Volts .............................................................12V DC
Use only
MILWAUKEE
®
M12™ Li-Ion battery packs
Recommended Ambient
Operating Temperature ......................-17°C to 51°C
FUNCTIONAL DESCRIPTION
1
2
7
1. Head
2. Extension poles
3. Battery bay
4. Legs
5. Carrying handle
6. Leg release buttons
7. Switch
5
3
4
6
Extending/Collapsing the Legs
Always extend and lock legs before raising the poles.
1. To
extend
, press in the release buttons on both sides
of the collar and slide the legs down while lifting the
light head up. The legs will latch into place.
2. To
collapse
, hold the light head and press the
release buttons. Slide the collar up until the legs
latch into place.
Raising/Lowering the Head
The light can be used with the head in 3 positions;
bottom, midrise, and top. To set poles at correct height,
the detents lock the poles in place.
OPERATION
WARNING
To reduce the risk of
injury, do not look directly into the light when
the light is on.
Using the Light
1. Insert battery pack.
2. Use the switch to cycle through High, Low, and
OFF. Press and hold to turn OFF from any setting.
MAINTENANCE
WARNING
To reduce the risk
of injury, always unplug the charger and remove
the battery pack from the charger or tool before
performing any maintenance. Never disassemble
the tool, battery pack or charger. Contact a
MILWAUKEE
®
service facility for ALL repairs.
Maintaining Light
Keep your light, battery pack and charger in good
repair by adopting a regular maintenance program. If
the light does not work properly, return the light to a
MILWAUKEE
®
service facility for repairs.
WARNING
To reduce the risk of
personal injury and damage, never immerse your
tool, battery pack or charger in liquid or allow a
Cleaning
Keep tool handles clean, dry and free of oil or grease.
Use only mild soap and a damp cloth to clean the tool,
battery pack and charger since certain cleaning agents
and solvents are harmful to plastics and other insulated
parts. Some of these include gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning
solvents, ammonia and household detergents contain-
solvents around tools.
ACCESSORIES
WARNING
Use only recommended accessories. Others
may be hazardous.
For a complete listing of
accessories refer to your
MILWAUKEE
®
Tool
catalogue
or
go
online
to
www.milwaukeetools.com.au/
www.milwaukeetools.co.nz. To obtain a catalogue,
contact your local distributor or a service centre.
Input power..................................................... 15 W